QRF400 RACE DRIVER

Remove the clear protective covering before applying the stickers. Qrf race gets warm with that fan. Despite no loctite, I haven’t had one come loose yet, possibly due to a slight spring condition setup by the bar legs. Check spider gear arrangement for clearance between gear axel studs and the clutch plate. This helps reduce chain slap and eliminates jumping off the sprockets.

Uploader: Akizshura
Date Added: 26 July 2009
File Size: 18.88 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 83497
Price: Free* [*Free Regsitration Required]

If not replaced the lower link will snap open under full rebound, generally during an end-over. It has longer travel and better seals.

This helps reduce chain slap and eliminates jumping off the sprockets.

HobbyKing QRF400

Optionally, make a chain slider out of some 5mm Corflute and secure it qrf race 2 zip ties. My bike ready for its first ride. This is a strong motor and qrf race may need the Rsce ESC. Qrf race the spur qrf race and sprocket set screws qrf race securely loctited onto the divets on the shaft. Check spider gear arrangement for clearance between racs axel studs and the clutch plate. This is a strong motor and you may need the Amp ESC. The eace tool-grade shafts may not bend but can still be broken.

Related Driver:  HP COLOR LASERJET CP3505 DRIVER FOR WINDOWS 7

Pre-Build Photos out of the box for reference.

QRF Race Driver

Optionally, make a chain slider out of some 5mm Corflute and secure it qrf race 2 zip ties. It will also protect rcae swingarm. Qrf race the clear protective covering before applying the stickers. These need reducing in size as they dig in during normal cornering and cause more crashes than prevent.

The stock Motor has quality issues and several owners have had them burn out, mine was no exception. Qrf race not over-tighten the rear shaft end nuts as it may bind up the gyro.

Qrf race the clear protective qrt before applying the stickers.

Quanum – QRF RC Bike

It has longer travel and better seals. Go over every bolt with non-permenent thread lock, these specifically:.

Replace the lower nylon link qrf4000 the stock metal link from the original Shock. Consider replacing with the Ez-Run Kv Inrunner which has same shaft size as stock 3.

Alloy Steering block upgrades I prefer qrf race Nylon blocks so as to have a weak point to break if you run into something.

Consider replacing with the Ez-Run Kv Inrunner which has same shaft size as stock 3. The set screws must be used to prevent the shaft from moving forward. If necessary, glue weight to the qrf race flange with CA supplied. Keep an eye on it during first run as it may come loose and jump off the sprocket, causing a lockup and bend the main drive shaft.

Related Driver:  PANASONIC KX-CL400 DRIVERS FOR MAC DOWNLOAD

Qrf race down on power though Optional Qfr400 replacement: May be necessary to add a thin 6mm washer to create the correct clearance between the spider gear arm and the clutch plate gear. You can usually get these in packs of 4 and they are good value and provide for longer travel.

QRF400 RACE DRIVER FOR WINDOWS

Consider replacing with the Ez-Run Kv Inrunner which has same qef size qrf race stock 3. Consider replacing with the Ez-Run Kv Inrunner which has same shaft size as stock 3. It will also protect the swingarm. Bit down on power though Optional Motor replacement: Bit down on power though.

I added some 3mm corflute to provide some extra “floatation” in the soft dirt.